strtr

(PHP 4, PHP 5, PHP 7, PHP 8)

strtr — 转换字符或替换字串

说明

strtr(string $string, string $from, string $to): string

替代签名（不支持命名参数）：

strtr(string $string, array $replace_pairs): string

如果指定三个参数，则该函数返回 string 的副本，from 中所有出现的每个（单字节）字符都已转换为 to 中的相应字符。例如，每次出现的 $from[$n] 都会替换为 $to[$n]，$n 是两个参数中的有效位移(offset)。

如果 from 与 to 长度不相等，那么忽略两者中较长的多余字符。string 的长度将与返回的长度一样。

如果指定两个参数，则第二个参数应该是 array('from' => 'to', ...) 形式的 array。返回值是 string，数组中所有所有出现的键都替换为相应的值。首先会尝试最长的键。一旦子字符串被替换，则新值将不会再次搜索。

在这种情况下，键和值可以是任意长度，前提是没有空值的键；另外，返回值的长度可以跟 string 的长度不同。但是，当所有键的长度相同时，函数最有效。

参数

string

待转换的 string。

from

要转成 to 的 string。

to

替换 from 的 string。

replace_pairs

参数 replace_pairs 可以用来取代 to 和 from ，因为它是 array('from' => 'to', ...) 形式的 array。

如果 replace_pairs 包含空 string（""）键，将忽略该元素；自 PHP 8.0.0 起，这种情况会引发 E_WARNING。

返回值

返回转换后的 string。

示例

示例 #1 strtr() 示例

<?php
// 在这种形式中，strtr() 进行逐字节转换
// 因此，假设这里是单字节编码：
$addr = strtr($addr, "äåö", "aao");
?>

下面的示例展示了仅使用两个参数调用 strtr() 的行为。注意优先替换（没有选择 "h"，因为有更长的匹配项）以及不再搜索已替换的文本。

示例 #2 使用两个参数的 strtr() 示例

<?php
$trans = array("h" => "-", "hello" => "hi", "hi" => "hello");
echo strtr("hi all, I said hello", $trans);
?>

以上示例会输出：

 
hello all, I said hi

两种行为的模式本质上是不同的。使用三个参数，strtr() 将按字节替换；使用两个参数，优先替换更长的子字符串，

示例 #3 strtr() 行为比较

<?php
echo strtr("baab", "ab", "01"),"\n";

$trans = array("ab" => "01");
echo strtr("baab", $trans);
?>

以上示例会输出：

 
1001
ba01

参见

str_replace() - 子字符串替换
preg_replace() - 执行一个正则表达式的搜索和替换

＋add a note

User Contributed Notes 32 notes

down

evan dot king at NOSPAM dot example dot com ¶

8 years ago

Here's an important real-world example use-case for strtr where str_replace will not work or will introduce obscure bugs:

<?php

$strTemplate = "My name is :name, not :name2.";
$strParams = [
  ':name' => 'Dave',
  'Dave' => ':name2 or :password', // a wrench in the otherwise sensible input
  ':name2' => 'Steve',
  ':pass' => '7hf2348', // sensitive data that maybe shouldn't be here
];

echo strtr($strTemplate, $strParams);
// "My name is Dave, not Steve."

echo str_replace(array_keys($strParams), array_values($strParams), $strTemplate);
// "My name is Steve or 7hf2348word, not Steve or 7hf2348word2."

?>

Any time you're trying to template out a string and don't necessarily know what the replacement keys/values will be (or fully understand the implications of and control their content and order), str_replace will introduce the potential to incorrectly match your keys because it does not expand the longest keys first.

Further, str_replace will replace in previous replacements, introducing potential for unintended nested expansions.  Doing so can put the wrong data into the "sub-template" or even give users a chance to provide input that exposes data (if they get to define some of the replacement strings).

Don't support recursive expansion unless you need it and know it will be safe.  When you do support it, do so explicitly by repeating strtr calls until no more expansions are occurring or a sane iteration limit is reached, so that the results never implicitly depend on order of your replacement keys.  Also make certain that any user input will expanded in an isolated step after any sensitive data is already expanded into the output and no longer available as input.

Note: using some character(s) around your keys to designate them also reduces the possibility of unintended mangling of output, whether maliciously triggered or otherwise.  Thus the use of a colon prefix in these examples, which you can easily enforce when accepting replacement input to your templating/translation system.

down

Hayley Watson ¶

10 years ago

Since strtr (like PHP's other string functions) treats strings as a sequence of bytes, and since UTF-8 and other multibyte encodings use - by definition - more than one byte for at least some characters, the three-string form is likely to have problems. Use the associative array form to specify the mapping.

<?php
// Assuming UTF-8
$str = 'Äbc Äbc'; // strtr() sees this as nine bytes (including two for each Ä)
echo strtr($str, 'Ä', 'a'); // The second argument is equivalent to the string "\xc3\x84" so "\xc3" gets replaced by "a" and the "\x84" is ignored

echo strtr($str, array('Ä' => 'a')); // Works much better
?>

down

allixsenos at gmail dot com ¶

14 years ago

fixed "normaliza" functions written below to include Slavic Latin characters... also, it doesn't return lowercase any more (you can easily get that by applying strtolower yourself)...

also, renamed to normalize()

<?php

function normalize ($string) {
    $table = array(
        'Š'=>'S', 'š'=>'s', 'Đ'=>'Dj', 'đ'=>'dj', 'Ž'=>'Z', 'ž'=>'z', 'Č'=>'C', 'č'=>'c', 'Ć'=>'C', 'ć'=>'c',
        'À'=>'A', 'Á'=>'A', 'Â'=>'A', 'Ã'=>'A', 'Ä'=>'A', 'Å'=>'A', 'Æ'=>'A', 'Ç'=>'C', 'È'=>'E', 'É'=>'E',
        'Ê'=>'E', 'Ë'=>'E', 'Ì'=>'I', 'Í'=>'I', 'Î'=>'I', 'Ï'=>'I', 'Ñ'=>'N', 'Ò'=>'O', 'Ó'=>'O', 'Ô'=>'O',
        'Õ'=>'O', 'Ö'=>'O', 'Ø'=>'O', 'Ù'=>'U', 'Ú'=>'U', 'Û'=>'U', 'Ü'=>'U', 'Ý'=>'Y', 'Þ'=>'B', 'ß'=>'Ss',
        'à'=>'a', 'á'=>'a', 'â'=>'a', 'ã'=>'a', 'ä'=>'a', 'å'=>'a', 'æ'=>'a', 'ç'=>'c', 'è'=>'e', 'é'=>'e',
        'ê'=>'e', 'ë'=>'e', 'ì'=>'i', 'í'=>'i', 'î'=>'i', 'ï'=>'i', 'ð'=>'o', 'ñ'=>'n', 'ò'=>'o', 'ó'=>'o',
        'ô'=>'o', 'õ'=>'o', 'ö'=>'o', 'ø'=>'o', 'ù'=>'u', 'ú'=>'u', 'û'=>'u', 'ý'=>'y', 'ý'=>'y', 'þ'=>'b',
        'ÿ'=>'y', 'Ŕ'=>'R', 'ŕ'=>'r',
    );
    
    return strtr($string, $table);
}

?>

down

dot dot dot dot dot alexander at gmail dot com ¶

15 years ago

OK, I debugged the function (had some errors)
Here it is:

if(!function_exists("stritr")){
    function stritr($string, $one = NULL, $two = NULL){
/*
stritr - case insensitive version of strtr
Author: Alexander Peev
Posted in PHP.NET
*/
        if(  is_string( $one )  ){
            $two = strval( $two );
            $one = substr(  $one, 0, min( strlen($one), strlen($two) )  );
            $two = substr(  $two, 0, min( strlen($one), strlen($two) )  );
            $product = strtr(  $string, ( strtoupper($one) . strtolower($one) ), ( $two . $two )  );
            return $product;
        }
        else if(  is_array( $one )  ){
            $pos1 = 0;
            $product = $string;
            while(  count( $one ) > 0  ){
                $positions = array();
                foreach(  $one as $from => $to  ){
                    if(   (  $pos2 = stripos( $product, $from, $pos1 )  ) === FALSE   ){
                        unset(  $one[ $from ]  );
                    }
                    else{
                        $positions[ $from ] = $pos2;
                    }
                }
                if(  count( $one ) <= 0  )break;
                $winner = min( $positions );
                $key = array_search(  $winner, $positions  );
                $product = (   substr(  $product, 0, $winner  ) . $one[$key] . substr(  $product, ( $winner + strlen($key) )  )   );
                $pos1 = (  $winner + strlen( $one[$key] )  );
            }
            return $product;
        }
        else{
            return $string;
        }
    }/* endfunction stritr */
}/* endfunction exists stritr */

down

joeldegan AT yahoo ¶

17 years ago

After battling with strtr trying to strip out MS word formatting from things pasted into forms I ended up coming up with this..

it strips ALL non-standard ascii characters, preserving html codes and such, but gets rid of all the characters that refuse to show in firefox.

If you look at this page in firefox you will see a ton of "question mark" characters and so it is not possible to copy and paste those to remove them from strings..  (this fixes that issue nicely, though I admit it could be done a bit better)

<?
function fixoutput($str){
    $good[] = 9;  #tab
    $good[] = 10; #nl
    $good[] = 13; #cr
    for($a=32;$a<127;$a++){
        $good[] = $a;
    }    
    $len = strlen($str);
    for($b=0;$b < $len+1; $b++){
        if(in_array(ord($str[$b]), $good)){
            $newstr .= $str[$b];
        }//fi
    }//rof
    return $newstr;
}
?>

down

Michael Schuijff ¶

12 years ago

I found that this approach is often faster than strtr() and won't change the same thing in your string twice (as opposed to str_replace(), which will overwrite things in the order of the array you feed it with):

<?php
function replace ($text, $replace) {
    $keys = array_keys($replace);
    $length = array_combine($keys, array_map('strlen', $keys));
    arsort($length);
    
    $array[] = $text;
    $count = 1;
    reset($length);
    while ($key = key($length)) {
        if (strpos($text, $key) !== false) {
            for ($i = 0; $i < $count; $i += 2) {
                if (($pos = strpos($array[$i], $key)) === false) continue;
                array_splice($array, $i, 1, array(substr($array[$i], 0, $pos), $replace[$key], substr($array[$i], $pos + strlen($key))));
                $count += 2;
            }
        }
        next($length);
    }
    return implode($array);
}
?>

down

horak.jan AT centrum.cz ¶

16 years ago

Here is a function to convert middle-european windows charset (cp1250) to the charset, that php script is written in:

<?php
    function cp1250_to_utf2($text){
        $dict  = array(chr(225) => 'á', chr(228) =>  'ä', chr(232) => 'č', chr(239) => 'ď', 
            chr(233) => 'é', chr(236) => 'ě', chr(237) => 'í', chr(229) => 'ĺ', chr(229) => 'ľ', 
            chr(242) => 'ň', chr(244) => 'ô', chr(243) => 'ó', chr(154) => 'š', chr(248) => 'ř', 
            chr(250) => 'ú', chr(249) => 'ů', chr(157) => 'ť', chr(253) => 'ý', chr(158) => 'ž',
            chr(193) => 'Á', chr(196) => 'Ä', chr(200) => 'Č', chr(207) => 'Ď', chr(201) => 'É', 
            chr(204) => 'Ě', chr(205) => 'Í', chr(197) => 'Ĺ',    chr(188) => 'Ľ', chr(210) => 'Ň', 
            chr(212) => 'Ô', chr(211) => 'Ó', chr(138) => 'Š', chr(216) => 'Ř', chr(218) => 'Ú', 
            chr(217) => 'Ů', chr(141) => 'Ť', chr(221) => 'Ý', chr(142) => 'Ž', 
            chr(150) => '-');
        return strtr($text, $dict);
    }
?>

down

dcz at phpbb-seo dot com ¶

10 years ago

strstr will issue a notice when $replace_pairs contains an array, even unused, with php 5.5.0.

It was not the case with version at least up to 5.3.2, but I'm not sure the notice was added with exactly 5.5.0.

<?php
$str = 'hi all, I said hello';
$replace_pairs = array(
      'all' => 'everybody',
    'unused' => array('somtehing', 'something else'),
     'hello' => 'hey',
);
// php 5.5.0 Notice: Array to string conversion in test.php on line 8
echo strtr($str, $replace_pairs); // hi everybody, I said hey
?>

since the result is still correct, @strstr seems a working solution.

down

troelskn at gmail dot com ¶

15 years ago

Here's another transcribe function. This one converts cp1252 (aka. Windows-1252) into iso-8859-1 (aka. latin1, the default PHP charset). It only transcribes the few exotic characters, which are unique to cp1252.

function transcribe_cp1252_to_latin1($cp1252) {
  return strtr(
    $cp1252,
    array(
      "\x80" => "e",  "\x81" => " ",    "\x82" => "'", "\x83" => 'f',
      "\x84" => '"',  "\x85" => "...",  "\x86" => "+", "\x87" => "#",
      "\x88" => "^",  "\x89" => "0/00", "\x8A" => "S", "\x8B" => "<",
      "\x8C" => "OE", "\x8D" => " ",    "\x8E" => "Z", "\x8F" => " ",
      "\x90" => " ",  "\x91" => "`",    "\x92" => "'", "\x93" => '"',
      "\x94" => '"',  "\x95" => "*",    "\x96" => "-", "\x97" => "--",
      "\x98" => "~",  "\x99" => "(TM)", "\x9A" => "s", "\x9B" => ">",
      "\x9C" => "oe", "\x9D" => " ",    "\x9E" => "z", "\x9F" => "Y"));

down

elloromtz at gmail dot com ¶

13 years ago

If you supply 3 arguments and the 2nd is an array, strtr will search the "A" from "Array" (because you're treating it as a scalar string) and replace it with the 3rd argument:

strtr('Analogy', array('x'=>'y'),  '_'); //'_nalogy'

so in reality the above code has the same affect as:

strtr('Analogy', 'A' , '_');

down

Annubis ¶

5 years ago

Since I was having a lot of trouble finding a multibyte safe strtr and the solutions I found didn't help, I came out with this function, I don't know how it works with non latin chars but it works for me using spanish/french utf8, I hope it helps someone... 
<?php
if(!function_exists('mb_strtr')) {
    function mb_strtr ($str, $from, $to = null) {
        if(is_array($from)) {
            $from = array_map('utf8_decode', $from);
            $from = array_map('utf8_decode', array_flip ($from));
            return utf8_encode (strtr (utf8_decode ($str), array_flip ($from)));
        }
        return utf8_encode (strtr (utf8_decode ($str), utf8_decode($from), utf8_decode ($to)));
    }
}
?>

down

dot dot dot dot dot alexander at gmail dot com ¶

15 years ago

Here is the stritr I always needed... I wrote it in 15 minutes... But only after the idea struck me. Hope you find it helpful, and enjoy...
<?php
if(!function_exists("stritr")){
    function stritr($string, $one = NULL, $two = NULL){
/*
stritr - case insensitive version of strtr
Author: Alexander Peev
Posted in PHP.NET
*/
        if(  is_string( $one )  ){
            $two = strval( $two );
            $one = substr(  $one, 0, min( strlen($one), strlen($two) )  );
            $two = substr(  $two, 0, min( strlen($one), strlen($two) )  );
            $product = strtr(  $string, ( strtoupper($one) . strtolower($one) ), ( $two . $two )  );
            return $product;
        }
        else if(  is_array( $one )  ){
            $pos1 = 0;
            $product = $string;
            while(  count( $one ) > 0  ){
                $positions = array();
                foreach(  $one as $from => $to  ){
                    if(   (  $pos2 = stripos( $product, $from, $pos1 )  ) === FALSE   ){
                        unset(  $one[ $from ]  );
                    }
                    else{
                        $positions[ $from ] = $pos2;
                    }
                }
                $winner = min( $positions );
                $key = array_search(  $winner, $positions  );
                $product = (   substr(  $product, 0, $winner  ) . $positions[$key] . substr(  $product, ( $winner + strlen($key) )  )   );
                $pos1 = (  $winner + strlen( $positions[$key] )  );
            }
            return $product;
        }
        else{
            return $string;
        }
    }/* endfunction stritr */
}/* endfunction exists stritr */
?>

down

Tedy ¶

11 years ago

Since strtr() is twice faster than strlwr I decided to write my own lowering function which also handles UTF-8 characters.

<?php

function strlwr($string, $utf = 1)
{
    $latin_letters = array('Ă' => 'a',
                            'Â' => 'a',
                            'Î' => 'i',
                            'Ș' => 's',
                            'Ş' => 's',
                            'Ț' => 't',
                            'Ţ' => 't');
                            
    $utf_letters = array('Ă' => 'ă',
                        'Â' => 'â',
                        'Î' => 'î',
                        'Ș' => 'ș',
                        'Ş' => 'ş',
                        'Ț' => 'ț',
                        'Ţ' => 'ţ');
                      
    $letters = array('A' => 'a',
                    'B' => 'b',
                    'C' => 'c',
                    'D' => 'd',
                    'E' => 'e',
                    'F' => 'f',
                    'G' => 'g',
                    'H' => 'h',
                    'I' => 'i',
                    'J' => 'j',
                    'K' => 'k',
                    'L' => 'l',
                    'M' => 'm',
                    'N' => 'n',
                    'O' => 'o',
                    'P' => 'p',
                    'Q' => 'q',
                    'R' => 'r',
                    'S' => 's',
                    'T' => 't',
                    'U' => 'u',
                    'V' => 'v',
                    'W' => 'w',
                    'X' => 'x',
                    'Y' => 'y',
                    'Z' => 'z');
    
    return ($utf == 1) ? strtr($string, array_merge($utf_letters, $letters)) : strtr($string, array_merge($latin_letters, $letters));
}

?>

This allows you to lower every character (even UTF-8 ones) if you don't set the second parameter, or just lower the UTF-8 ones into their specific latin characters (used when making friendly-urls for example). 

I used romanian characters but, of course, you can add your own local characters. 

Feel free to use/modify this function as you wish. Hope it helps.

down

martin[dot]pelikan[at]gmail[dot]com ¶

17 years ago

// if you are upset with windows' ^M characters at the end of the line,
// these two lines are for you:
$trans = array("\x0D" => "");
$text = strtr($orig_text,$trans);

// note that ctrl+M (in vim known as ^M) is hexadecimally 0x0D

down

doydoy44 ¶

10 years ago

The example of VOVA (http://www.php.net/manual/fr/function.strtr.php#111968) is good but the result is false:
His example dont replace the string.

<?php
function f1_strtr() {
  for($i=0; $i<1000000; ++$i) {
    $new_string = strtr("aboutdealers.com", array(".com" => ""));
  }
  return $new_string;
}
function f2_str_replace() {
  for($i=0; $i<1000000; ++$i) {
    $new_string = str_replace( ".com", "", "aboutdealers.com");
  }
  return $new_string;
}
$start = microtime(true);
$strtr = f1_strtr();
$stop = microtime(true);
$time_strtr = $stop - $start;
 
$start = microtime(true);
$str_replace = f2_str_replace();
$stop = microtime(true);
$time_str_replace = $stop - $start;
 
 
echo 'time strtr       : ' . $time_strtr       . "\tresult :" . $strtr       . "\n";
echo 'time str_replace : ' . $time_str_replace . "\tresult :" . $str_replace . "\n";
echo 'time strtr > time str_replace => ' . ($time_strtr > $time_str_replace);
?>
--------------------------------------
time strtr       : 3.9719619750977      result :aboutdealers
time str_replace : 2.9930369853973      result :aboutdealers
time strtr > time str_replace => 1

str_replace is faster than strtr

down

qeremy [atta] gmail [dotta] com ¶

10 years ago

Weird, but strtr corrupting chars, if used like below and if file is encoded in UTF-8;

<?php
$str = 'Äbc Äbc';
echo strtr($str, 'Ä', 'a');
// output: a�bc a�bc
?>

And a simple solution;

<?php
function strtr_unicode($str, $a = null, $b = null) {
    $translate = $a;
    if (!is_array($a) && !is_array($b)) {
        $a = (array) $a;
        $b = (array) $b;
        $translate = array_combine(
            array_values($a),
            array_values($b)
        );
    }
    // again weird, but accepts an array in this case
    return strtr($str, $translate);
}

$str = 'Äbc Äbc';
echo strtr($str, 'Ä', 'a') ."\n";
echo strtr_unicode($str, 'Ä', 'a') ."\n";
echo strtr_unicode($str, array('Ä' => 'a')) ."\n";
// outputs
// a�bc a�bc
// abc abc
// abc abc
?>

down

Sidney Ricardo ¶

15 years ago

This work fine to me:



<?php

function normaliza ($string){

    $a = 'ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞ

ßàáâãäåæçèéêëìíîïðñòóôõöøùúûýýþÿŔŕ';

    $b = 'aaaaaaaceeeeiiiidnoooooouuuuy

bsaaaaaaaceeeeiiiidnoooooouuuyybyRr'; 

    $string = utf8_decode($string);     

    $string = strtr($string, utf8_decode($a), $b);

    $string = strtolower($string);

    return utf8_encode($string);

}

?>

down

gabi at unica dot edu ¶

21 years ago

To convert special chars to their html entities strtr you can use strtr in conjunction with get_html_translation_table(HTML_ENTITIES) :

$trans = get_html_translation_table(HTML_ENTITIES);
$html_code = strtr($html_code, $trans); 

This will replace in $html_code the ? by &Aacute; , etc.

down

Anonymous ¶

18 years ago

If you are going to call strtr a lot, consider using str_replace instead, as it is much faster. I cut execution time in half just by doing this.

<?
// i.e. instead of:
$s=strtr($s,$replace_array);

// use: 
foreach($replace_array as $key=>$value) $s=str_replace($key,$value,$s);
?>

down

tomhmambo at seznam dot cz ¶

17 years ago

<?
// Windows-1250 to ASCII
// This function replace all Windows-1250 accent characters with 
// thier non-accent ekvivalents. Useful for Czech and Slovak languages.

function win2ascii($str)    {    

    $str = StrTr($str,
        "\xE1\xE8\xEF\xEC\xE9\xED\xF2",
        "\x61\x63\x64\x65\x65\x69\x6E");
        
    $str = StrTr($str,
        "\xF3\xF8\x9A\x9D\xF9\xFA\xFD\x9E\xF4\xBC\xBE",
        "\x6F\x72\x73\x74\x75\x75\x79\x7A\x6F\x4C\x6C");
        
    $str = StrTr($str,
        "\xC1\xC8\xCF\xCC\xC9\xCD\xC2\xD3\xD8",
        "\x41\x43\x44\x45\x45\x49\x4E\x4F\x52");
        
    $str = StrTr($str,
        "\x8A\x8D\xDA\xDD\x8E\xD2\xD9\xEF\xCF",
        "\x53\x54\x55\x59\x5A\x4E\x55\x64\x44");

    return $str;
}
?>

down

Romain ¶

9 years ago

<?php
    /**
     * Clean string,
     * minimize and remove space, accent and other
     *
     * @param string $string
     * @return string
     */
    public function mb_strtoclean($string){
        // Valeur a nettoyer (conversion)
        $unwanted_array = array(    'Š'=>'S', 'š'=>'s', 'Ž'=>'Z', 'ž'=>'z', 'À'=>'A', 'Á'=>'A', 'Â'=>'A', 'Ã'=>'A', 'Ä'=>'A', 'Å'=>'A', 'Æ'=>'A', 'Ç'=>'C', 'È'=>'E', 'É'=>'E',
                                    'Ê'=>'E', 'Ë'=>'E', 'Ì'=>'I', 'Í'=>'I', 'Î'=>'I', 'Ï'=>'I', 'Ñ'=>'N', 'Ò'=>'O', 'Ó'=>'O', 'Ô'=>'O', 'Õ'=>'O', 'Ö'=>'O', 'Ø'=>'O', 'Ù'=>'U',
                                    'Ú'=>'U', 'Û'=>'U', 'Ü'=>'U', 'Ý'=>'Y', 'Þ'=>'B', 'ß'=>'Ss', 'à'=>'a', 'á'=>'a', 'â'=>'a', 'ã'=>'a', 'ä'=>'a', 'å'=>'a', 'æ'=>'a', 'ç'=>'c',
                                    'è'=>'e', 'é'=>'e', 'ê'=>'e', 'ë'=>'e', 'ì'=>'i', 'í'=>'i', 'î'=>'i', 'ï'=>'i', 'ð'=>'o', 'ñ'=>'n', 'ò'=>'o', 'ó'=>'o', 'ô'=>'o', 'õ'=>'o',
                                    'ö'=>'o', 'ø'=>'o', 'ù'=>'u', 'ú'=>'u', 'û'=>'u', 'ý'=>'y', 'ý'=>'y', 'þ'=>'b', 'ÿ'=>'y',
                                    ' ' => '', '_' => '', '-' => '', '.'=> '', ',' => '', ';' => '');

        return mb_strtolower(strtr($string, $unwanted_array ));
    }

down

ktogias at math dot upatras dot gr ¶

19 years ago

This function is usefull for 
accent insensitive regexp 
searches into greek (iso8859-7) text:
(Select View -> Character Encoding -> Greek (iso8859-7)
at your browser to see the correct greek characters)

function gr_regexp($mystring){
        $replacement=array(
                array("?","?","?","?"),
                array("?","?","?","?"),
                array("?","?","?","?"),
                array("?","?","?","?","?","?"),
                array("?","?","?","?"),
                array("?","?","?","?","?","?"),
                array("?","?","?","?")
        );
        foreach($replacement as $group){
                foreach($group as $character){
                        $exp="[";
                        foreach($group as $expcharacter){
                                $exp.=$expcharacter;
                        }
                        $exp.="]";
                        $trans[$character]=$exp;
                }
        }
        $temp=explode(" ", $mystring);
        for ($i=0;$i<sizeof($temp);$i++){
                $temp[$i]=strtr($temp[$i],$trans);
                $temp[$i]=addslashes($temp[$i]);
        }
        return implode(".*",$temp);
}

$match=gr_regexp("????????????????????? ??? ????????");

//The next query string can be sent to MySQL
through mysql_query()
$query=
      "Select `column` from `table` where `column2` REGEXP   
                         '".$match."'";

down

j at pureftpd dot org ¶

19 years ago

Here's a very useful function to translate Microsoft characters into Latin 15, so that people won't see any more square instead of characters in web pages .

function demicrosoftize($str) {
    return strtr($str,
"\x82\x83\x84\x85\x86\x87\x89\x8a" .
"\x8b\x8c\x8e\x91\x92\x93\x94\x95" .
"\x96\x97\x98\x99\x9a\x9b\x9c\x9e\x9f",
"'f\".**^\xa6<\xbc\xb4''" .
"\"\"---~ \xa8>\xbd\xb8\xbe");
}

down

bisqwit at iki dot fi ¶

21 years ago

#!/bin/sh
# This shell script generates a strtr() call
# to translate from a character set to another.
# Requires: gnu recode, perl, php commandline binary
#
# Usage:
#  Set set1 and set2 to whatever you prefer
#  (multibyte character sets are not supported)
#  and run the script. The script outputs
#  a strtr() php code for you to use.
#
# Example is set to generate a
# cp437..latin9 conversion code.
#
set1=cp437
set2=iso-8859-15
result="`echo '<? for($c=32;$c<256;$c++)'\
              'echo chr($c);'\            
         |php -q|recode -f $set1..$set2`"
echo "// This php function call converts \$string in $set1 to $set2";
cat <<EOF  | php -q
<?php
\$set1='`echo -n "$result"\
   |perl -pe "s/([\\\\\'])/\\\\\\\\\\$1/g"`';
\$set2='`echo -n "$result"|recode -f $set2..$set1\
   |perl -pe "s/([\\\\\'])/\\\\\\\\\\$1/g"`';
\$erase=array();
\$l=strlen(\$set1);
for(\$c=0;\$c<\$l;++\$c)
  if(\$set1[\$c]==\$set2[\$c])\$erase[\$set1[\$c]]='';
if(count(\$erase))
{
  \$set1=strtr(\$set1,\$erase);
  \$set2=strtr(\$set2,\$erase);
}
if(!strlen(\$set1))echo 'IRREVERSIBLE';else
echo "strtr(\\\$string,\n  '",
     ereg_replace('([\\\\\\'])', '\\\\\\1', \$set2),
     "',\n  '",
     ereg_replace('([\\\\\\'])', '\\\\\\1', \$set1),
     "');";
EOF

down

-1

ajitsingh4u at gmail dot com ¶

16 years ago

/**
* Replaces special characters with single quote,double quote and comma for charset iso-8859-1
*
* replaceSpecialChars()
* @param string $str
* @return string
*/
function replaceSpecialChars($str)
{
    //`(96) ’(130) „(132) ‘(145) ’(146) “(147) ”(148) ´(180)   // equivalent ascii values of these characters.
    $str = strtr($str, "`’„‘’´", "'','''");
    $str = strtr($str, '“”', '""'); 
    return $str;
}

down

-1

patrick at p-roocks dot de ¶

18 years ago

As Daijoubu suggested use str_replace instead of this function for large arrays/subjects. I just tried it with a array of 60 elements, a string with 8KB length, and the execution time of str_replace was faster at factor 20! 

Patrick

down

-1

ru dot dy at gmx dot net ¶

18 years ago

Posting umlaute here resulted in a mess. Heres a version of the same function that works with preg_replace only:
<?php
  function getRewriteString($sString) {
     $string = strtolower(htmlentities($sString));
     $string = preg_replace("/&(.)(uml);/", "$1e", $string);
     $string = preg_replace("/&(.)(acute|cedil|circ|ring|tilde|uml);/", "$1", $string);
     $string = preg_replace("/([^a-z0-9]+)/", "-", html_entity_decode($string));
     $string = trim($string, "-");
     return $string;
  }
?>

down

-1

symlink23-remove-my-spleen at yahoo dot com ¶

21 years ago

As noted in the str_rot13 docs, some servers don't provide the str_rot13() function. However, the presence of strtr makes it easy to build your own facsimile thereof:

if (!function_exists('str_rot13')) {
    function str_rot13($str) {
        $from = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ';
        $to   = 'nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM';

        return strtr($str, $from, $to);
    }
}

This is suitable for very light "encryption" such as hiding email addressess from spambots (then unscrambling them in a mail class, for example).

$mail_to=str_rot13("$mail_to");

down

-1

erik at eldata dot se ¶

21 years ago

As an alternative to the not-yet-existing function stritr mentioned in the first note above You can easily do this:



strtr("abc","ABCabc","xyzxyz")



or more general:



strtr("abc",

strtoupper($fromchars).strtolower($fromchars),

$tochars.$tochars);



Just a thought.

down

-3

Fernando "Malk" Piancastelli ¶

20 years ago

Here's a function to replace linebreaks to html <p> tags. This was initially designed to receive a typed text by a form in a "insert new notice" page and put in a database, then a "notice" page could get the text preformatted with paragraph tags instead of linebreaks that won't appear on browser. The function also removes repeated linebreaks the user may have typed in the form.

function break_to_tags(&$text) {

       // find and remove repeated linebreaks

       $double_break = array("\r\n\r\n" => "\r\n");
       do {
              $text = strtr($text, $double_break);
              $position = strpos($text, "\r\n\r\n");
       } while ($position !== false);

       // find and replace remanescent linebreaks by <p> tags

       $change = array("\r\n" => "<p>");
       $text = strtr($text, $change);
}

[]'s
Fernando

down

-3

tekintian#gmail.com ¶

3 years ago

/**
 *  
 *  将一个字串中含有全角的数字字符、字母、空格或'%+-()'字符转换为相应半角字符
 * @author tekintian#gmail.com
 * @param   string       $str         待转换字串
 *
 * @return  string       $str         处理后字串
 */
function str2byte_convert(String $str):String  {
    $arr = array('０' => '0', '１' => '1', '２' => '2', '３' => '3', '４' => '4',
        '５' => '5', '６' => '6', '７' => '7', '８' => '8', '９' => '9',
        'Ａ' => 'A', 'Ｂ' => 'B', 'Ｃ' => 'C', 'Ｄ' => 'D', 'Ｅ' => 'E',
        'Ｆ' => 'F', 'Ｇ' => 'G', 'Ｈ' => 'H', 'Ｉ' => 'I', 'Ｊ' => 'J',
        'Ｋ' => 'K', 'Ｌ' => 'L', 'Ｍ' => 'M', 'Ｎ' => 'N', 'Ｏ' => 'O',
        'Ｐ' => 'P', 'Ｑ' => 'Q', 'Ｒ' => 'R', 'Ｓ' => 'S', 'Ｔ' => 'T',
        'Ｕ' => 'U', 'Ｖ' => 'V', 'Ｗ' => 'W', 'Ｘ' => 'X', 'Ｙ' => 'Y',
        'Ｚ' => 'Z', 'ａ' => 'a', 'ｂ' => 'b', 'ｃ' => 'c', 'ｄ' => 'd',
        'ｅ' => 'e', 'ｆ' => 'f', 'ｇ' => 'g', 'ｈ' => 'h', 'ｉ' => 'i',
        'ｊ' => 'j', 'ｋ' => 'k', 'ｌ' => 'l', 'ｍ' => 'm', 'ｎ' => 'n',
        'ｏ' => 'o', 'ｐ' => 'p', 'ｑ' => 'q', 'ｒ' => 'r', 'ｓ' => 's',
        'ｔ' => 't', 'ｕ' => 'u', 'ｖ' => 'v', 'ｗ' => 'w', 'ｘ' => 'x',
        'ｙ' => 'y', 'ｚ' => 'z',
        '（' => '(', '）' => ')', '〔' => '[', '〕' => ']', '【' => '[',
        '】' => ']', '〖' => '[', '〗' => ']', '“' => '[', '”' => ']',
        '‘' => '[', '’' => ']', '｛' => '{', '｝' => '}', '《' => '<',
        '》' => '>',
        '％' => '%', '＋' => '+', '—' => '-', '－' => '-', '～' => '-',
        '：' => ':', '。' => '.', '、' => ',', '，' => '.', '、' => '.',
        '；' => ',', '？' => '?', '！' => '!', '…' => '-', '‖' => '|',
        '”' => '"', '’' => '`', '‘' => '`', '｜' => '|', '〃' => '"',
        '　' => ' ');

    return strtr($str, $arr);
}

down

-2

Anonymous ¶

3 years ago

The string, string form cannot remove characters, but the array form can.

＋add a note