db2_pconnect

(PECL ibm_db2 >= 1.0.0)

db2_pconnect — Returns a persistent connection to a database

说明

db2_pconnect(
    string $database,
    ?string $username,
    ?string $password,
    array $options = []
): resource|false

Returns a persistent connection to an IBM DB2 Universal Database, IBM Cloudscape, or Apache Derby database.

For more information on persistent connections, refer to 持久数据库连接.

Calling db2_close() on a persistent connection always returns true, but the underlying DB2 client connection remains open and waiting to serve the next matching db2_pconnect() request.

Users running version 1.9.0 or later of ibm_db2 should be aware that the extension will perform a transaction rollback on persistent connections at the end of a request, thus ending the transaction. This prevents the transaction block from carrying over to the next request which uses that connection if script execution ends before the transaction block does.

参数

database

The database alias in the DB2 client catalog.

username

The username with which you are connecting to the database.

password

The password with which you are connecting to the database.

options

An associative array of connection options that affect the behavior of the connection, where valid array keys include:

autocommit

Passing the DB2_AUTOCOMMIT_ON value turns autocommit on for this connection handle.

Passing the DB2_AUTOCOMMIT_OFF value turns autocommit off for this connection handle.

DB2_ATTR_CASE

Passing the DB2_CASE_NATURAL value specifies that column names are returned in natural case.

Passing the DB2_CASE_LOWER value specifies that column names are returned in lower case.

Passing the DB2_CASE_UPPER value specifies that column names are returned in upper case.

CURSOR

Passing the DB2_FORWARD_ONLY value specifies a forward-only cursor for a statement resource. This is the default cursor type and is supported on all database servers.

Passing the DB2_SCROLLABLE value specifies a scrollable cursor for a statement resource. This mode enables random access to rows in a result set, but currently is supported only by IBM DB2 Universal Database.

The following new option is available in ibm_db2 version 1.7.0 and later.

trustedcontext

Passing the DB2_TRUSTED_CONTEXT_ENABLE value turns trusted context on for this connection handle. This parameter cannot be set using db2_set_option().

This key works only if the database is cataloged (even if the database is local), or if you specify the full DSN when you create the connection.

To catalog the database, use following commands:

db2 catalog tcpip node loopback remote <SERVERNAME> server <SERVICENAME>
db2 catalog database <LOCALDBNAME> as <REMOTEDBNAME> at node loopback
db2 "update dbm cfg using svcename <SERVICENAME>"
db2set DB2COMM=TCPIP

The following new i5/OS options are available in ibm_db2 version 1.5.1 and later.

小技巧

Conflicting connection attributes used in conjunction with persistent connections can produce indeterminate results on i5/OS. Site policies should be establish for all applications using each persistent connection user profile. The default DB2_AUTOCOMMIT_ON is suggested when using persistent connections.

i5_lib

A character value that indicates the default library that will be used for resolving unqualified file references. This is not valid if the connection is using system naming mode.

i5_naming

DB2_I5_NAMING_ON value turns on DB2 UDB CLI iSeries system naming mode. Files are qualified using the slash (/) delimiter. Unqualified files are resolved using the library list for the job.

DB2_I5_NAMING_OFF value turns off DB2 UDB CLI default naming mode, which is SQL naming. Files are qualified using the period (.) delimiter. Unqualified files are resolved using either the default library or the current user ID.

i5_commit

The i5_commit attribute should be set before the db2_pconnect(). If the value is changed after the connection has been established, and the connection is to a remote data source, the change does not take effect until the next successful db2_pconnect() for the connection handle.

注意:
The php.ini setting ibm_db2.i5_allow_commit==0 or DB2_I5_TXN_NO_COMMIT is the default, but may be overridden with the i5_commit option.

DB2_I5_TXN_NO_COMMIT - Commitment control is not used.

DB2_I5_TXN_READ_UNCOMMITTED - Dirty reads, nonrepeatable reads, and phantoms are possible.

DB2_I5_TXN_READ_COMMITTED - Dirty reads are not possible. Nonrepeatable reads, and phantoms are possible.

DB2_I5_TXN_REPEATABLE_READ - Dirty reads and nonrepeatable reads are not possible. Phantoms are possible.

DB2_I5_TXN_SERIALIZABLE - Transactions are serializable. Dirty reads, non-repeatable reads, and phantoms are not possible

i5_query_optimize

DB2_FIRST_IO All queries are optimized with the goal of returning the first page of output as fast as possible. This goal works well when the output is controlled by a user who is most likely to cancel the query after viewing the first page of output data. Queries coded with an OPTIMIZE FOR nnn ROWS clause honor the goal specified by the clause.

DB2_ALL_IO All queries are optimized with the goal of running the entire query to completion in the shortest amount of elapsed time. This is a good option when the output of a query is being written to a file or report, or the interface is queuing the output data. Queries coded with an OPTIMIZE FOR nnn ROWS clause honor the goal specified by the clause. This is the default.

i5_dbcs_alloc

DB2_I5_DBCS_ALLOC_ON value turns on DB2 6X allocation scheme for DBCS translation column size growth.

DB2_I5_DBCS_ALLOC_OFF value turns off DB2 6X allocation scheme for DBCS translation column size growth.

注意:
The php.ini setting ibm_db2.i5_dbcs_alloc==0 or DB2_I5_DBCS_ALLOC_OFF is the default, but may be overridden with the i5_dbcs_alloc option.

i5_date_fmt

DB2_I5_FMT_ISO - The International Organization for Standardization (ISO) date format yyyy-mm-dd is used. This is the default.

DB2_I5_FMT_USA - The United States date format mm/dd/yyyy is used.

DB2_I5_FMT_EUR - The European date format dd.mm.yyyy is used.

DB2_I5_FMT_JIS - The Japanese Industrial Standard date format yyyy-mm-dd is used.

DB2_I5_FMT_MDY - The date format mm/dd/yyyy is used.

DB2_I5_FMT_DMY - The date format dd/mm/yyyy is used.

DB2_I5_FMT_YMD - The date format yy/mm/dd is used.

DB2_I5_FMT_JUL - The Julian date format yy/ddd is used.

DB2_I5_FMT_JOB - The job default is used.

i5_date_sep

DB2_I5_SEP_SLASH - A slash ( / ) is used as the date separator. This is the default.

DB2_I5_SEP_DASH - A dash ( - ) is used as the date separator.

DB2_I5_SEP_PERIOD - A period ( . ) is used as the date separator.

DB2_I5_SEP_COMMA - A comma ( , ) is used as the date separator.

DB2_I5_SEP_BLANK - A blank is used as the date separator.

DB2_I5_SEP_JOB - The job default is used

i5_time_fmt

DB2_I5_FMT_ISO - The International Organization for Standardization (ISO) time format hh.mm.ss is used. This is the default.

DB2_I5_FMT_USA - The United States time format hh:mmxx is used, where xx is AM or PM.

DB2_I5_FMT_EUR - The European time format hh.mm.ss is used.

DB2_I5_FMT_JIS - The Japanese Industrial Standard time format hh:mm:ss is used.

DB2_I5_FMT_HMS - The hh:mm:ss format is used.

i5_time_sep

DB2_I5_SEP_COLON - A colon ( : ) is used as the time separator. This is the default.

DB2_I5_SEP_PERIOD - A period ( . ) is used as the time separator.

DB2_I5_SEP_COMMA - A comma ( , ) is used as the time separator.

DB2_I5_SEP_BLANK - A blank is used as the time separator.

DB2_I5_SEP_JOB - The job default is used.

i5_decimal_sep

DB2_I5_SEP_PERIOD - A period ( . ) is used as the decimal separator. This is the default.

DB2_I5_SEP_COMMA - A comma ( , ) is used as the decimal separator.

DB2_I5_SEP_JOB - The job default is used.

The following new i5/OS option is available in ibm_db2 version 1.8.0 and later.

i5_libl

A character value that indicates the library list that will be used for resolving unqualified file references. Specify the library list elements separated by blanks 'i5_libl'=>"MYLIB YOURLIB ANYLIB".

注意:
i5_libl calls qsys2/qcmdexc('cmd',cmdlen), which is only available in i5/OS V5R4 and later.

返回值

Returns a connection handle resource if the connection attempt is successful. db2_pconnect() tries to reuse an existing connection resource that exactly matches the database, username, and password parameters. If the connection attempt fails, db2_pconnect() returns false.

更新日志

版本	说明
ibm_db2 1.9.0	Active transactions within a persistent connection will be rolled back at the end of each request.
ibm_db2 1.8.0	The `i5_libl` option is available for i5/OS users.
ibm_db2 1.7.0	The `trustedcontext` option is available.
ibm_db2 1.5.1	The `i5_lib`, `i5_naming`, `i5_commit`, `i5_query_optimize`, `i5_dbcs_alloc`, `i5_date_fmt`, `i5_date_sep`, `i5_time_fmt`, `i5_time_sep` and `i5_decimal_sep` options are available for i5/OS users.

示例

示例 #1 A db2_pconnect() example

In the following example, the first call to db2_pconnect() returns a new persistent connection resource. The second call to db2_pconnect() returns a persistent connection resource that simply reuses the first persistent connection resource.

<?php
$database = 'SAMPLE';
$user = 'db2inst1';
$password = 'ibmdb2';

$pconn = db2_pconnect($database, $user, $password);

if ($pconn) {
    echo "Persistent connection succeeded.";
}
else {
    echo "Persistent connection failed.";
}

$pconn2 = db2_pconnect($database, $user, $password);
if ($pconn) {
    echo "Second persistent connection succeeded.";
}
else {
    echo "Second persistent connection failed.";
}
?>

以上示例会输出：

 
Persistent connection succeeded.
Second persistent connection succeeded.

示例 #2 Using trusted context

The following example shows how to enable trusted context, switch users, and get the current user ID.

<?php

$database = "SAMPLE";
$hostname = "localhost";
$port = 50000;
$authID = "db2inst1";
$auth_pass = "ibmdb2";

$tc_user = "tcuser";
$tc_pass = "tcpassword";

$dsn = "DATABASE=$database;HOSTNAME=$hostname;PORT=$port;
  PROTOCOL=TCPIP;UID=$authID;PWD=$auth_pass;";
$options = array ("trustedcontext" => DB2_TRUSTED_CONTEXT_ENABLE);

$tc_conn = db2_pconnect($dsn, "", "", $options);
if($tc_conn) {
    echo "Explicit trusted connection succeeded.\n";

    if(db2_get_option($tc_conn, "trustedcontext")) {
        $userBefore = db2_get_option($tc_conn, "trusted_user");

        //Do some work as user 1.

        //Switching to trusted user.
        $parameters = array("trusted_user" => $tc_user,
          "trusted_password" => $tcuser_pass);
        $res = db2_set_option ($tc_conn, $parameters, 1);

        $userAfter = db2_get_option($tc_conn, "trusted_user");
        //Do more work as trusted user.

        if($userBefore != $userAfter) {
            echo "User has been switched." . "\n";
        }
    }

    db2_close($tc_conn);
}
else {
    echo "Explicit trusted connection failed.\n";
}
?>

以上示例会输出：

 
Explicit trusted connection succeeded.
User has been switched.

参见

db2_connect() - Returns a connection to a database

＋add a note

User Contributed Notes 2 notes

down

satoruyoshida at php dot net ¶

11 years ago

If You will create db2 connection on IBMi , QSQSRVR job will be created under QSYSWRK subsystem with specified user.
You can ensure it with using db2_pconnect() function.

For example, db2_pconnect('*LOCAL', 'TESTUSR', 'PASSWORD') will bring us QSQSRVR job with TESTUSR user.

If You omit the user, IHS default user is used in the job.

down

php at redlagoon dot net ¶

5 years ago

The ibm_db2.ini file controls many properties related to to pconnect.   For example, stale connection handling is configurable.

＋add a note